<thinking>
Okay, let's see. I need to create a SPICE netlist for this circuit. First, I'll identify all the components and their connections.

Starting from the top left, there's a voltage source labeled V1 connected between node 1 and node 0. Then, there's a resistor R2 connected from node 0 to node 2. The capacitor C1 is between node 1 and node 0. 

Next, there's a resistor R1 connected between node 0 and another node, which I'll call node 3. Then, there's a resistor R3 connected from node 1 to node 3. 

There's also a dependent voltage source labeled with a diamond shape. The label says "-c1*V0", which probably means it's a voltage-controlled voltage source (VCVS) with a gain of -c1. The controlling voltage is V0, which is across R2. So the dependent source is connected between node 3 and node 2. 

Wait, the dependent source's controlling voltage is V0, which is the voltage across R2. In SPICE, a VCVS is defined as E followed by the name, then the output nodes, then the controlling voltage's nodes. So the dependent source E1 would be E1 3 2 0 2 -c1. 

Let me double-check the nodes. Node 1 is connected to V1's positive terminal and R3. Node 0 is the common ground, connected to V1's negative, R2, C1, and R1. Node 2 is connected to R2's other end and the dependent source's output. Node 3 is between R1 and R3, and the dependent source's input.

So components:

- V1: 1 0
- R2: 0 2
- C1: 1 0
- R1: 0 3
- R3: 1 3
- E1: 3 2 0 2 -c1

I need to make sure the nodes are correctly labeled. The dependent source's controlling voltage is V0, which is across R2 (nodes 0 and 2). The dependent source itself is between node 3 and node 2. So the netlist lines should reflect that.
</thinking>
<answer>
V1 1 0
R2 0 2
C1 1 0
R1 0 3
R3 1 3
E1 3 2 0 2 -c1
</answer>