<thinking>
To create the netlist, we need to identify all components and their connections:

1. **Resistors:**
   - \( R_1 \) is connected between nodes 1 and 0.
   - \( R_2 \) is connected between nodes 1 and 1 (which is a loop back to the same node, effectively not contributing to the circuit).
   - \( R_3 \) is connected between nodes 1 and 4.

2. **Independent Voltage Source:**
   - \( V_1 \) is connected between nodes 3 and 0, with the positive terminal at node 3.

3. **Dependent Voltage Source:**
   - The dependent voltage source is controlled by the voltage across \( V_1 \) and is connected between nodes 4 and 3. It is a voltage-controlled voltage source (VCVS) with a gain of \( x1 \).

Based on this information, the netlist can be written as follows:
- Resistors are denoted as `R<name> <node1> <node2> <value>`.
- Independent voltage sources are denoted as `V<name> <node+> <node-> <value>`.
- Dependent voltage sources are denoted as `E<name> <node+> <node-> <control_node+> <control_node-> <gain>`.

Note: The value of resistors and the gain of the dependent source are not specified in the image, so they will be represented symbolically.
</thinking>

<answer>
R1 1 0 R1
R3 1 4 R3
V1 3 0 V1
E1 4 3 3 0 x1
</answer>