
<|begin_of_box|><thinking>I need to analyze the circuit to identify all components and their connections. First, I'll note the node labels visible in the circuit: there are four distinct nodes labeled 1, 0, 3, and 4. 

Looking at the components:
1. Resistor R2 is connected between node 1 (bottom left) and node 0 (bottom center)
2. Resistor R1 is connected between node 1 (middle) and node 0 
3. Resistor R3 is connected between node 1 (top connection point) and node 4 (top right)
4. Independent voltage source V1 is connected between node 3 (bottom right) and node 0, with positive terminal at node 3
5. Dependent voltage source (controlled by V1 with gain x1) is connected between node 4 and node 3, with positive terminal at node 4

For SPICE netlist formatting:
- Resistors use "Rname node1 node2"
- Independent voltage sources use "Vname node+ node-"
- Dependent voltage sources (VCVS) use "Exname node+ node- Vcont gain"

I'll verify all connections match the schematic and ensure proper node ordering for each component.</thinking>
<answer>R2 1 0
R1 1 0
R3 1 4
V1 3 0
E1 4 3 V1 x1</answer>