
<|begin_of_box|><thinking>I need to carefully analyze the circuit to identify all components and their connections. 

First, I'll identify each component:
1. There's a voltage-controlled voltage source (VCVS) with a diamond symbol showing + on node 4 and - on node 1. The control is labeled as x₁V₀, indicating it's controlled by voltage V₀ across resistor R₁ (between nodes 3 and 2).

2. A voltage source V₁ shown with a sine wave symbol, with + on node 0 and - on node 3.

3. Resistor R₃ connecting nodes 4 and 0.

4. Inductor L₁ connecting nodes 1 and 3.

5. Resistor R₁ connecting nodes 3 and 2, with voltage V₀ labeled across it.

6. Resistor R₂ connecting nodes 1 and 2.

For the netlist, I need to follow SPICE conventions:
- VCVS: Ename n+ n- nc+ nc- gain → E1 4 1 3 2 x1
- Voltage source: Vname n+ n- [type] → V1 0 3 (sine wave symbol suggests AC/SIN, but basic form is sufficient)
- Resistors: Rname n1 n2 → R3 4 0, R1 3 2, R2 1 2
- Inductor: Lname n1 n2 → L1 1 3

I'll verify all connections match the schematic and ensure proper node ordering.</thinking>
<answer>E1 4 1 3 2 x1
V1 0 3
R3 4 0
L1 1 3
R1 3 2
R2 1 2</answer>