<thinking>
To create the SPICE-like netlist, I'll identify each component and its connections:

1. **Voltage Source \( V_1 \)**: This is connected between nodes 0 and 3. The positive terminal is at node 3 and the negative terminal is at node 0.
2. **Inductor \( L_1 \)**: This is connected between nodes 0 and 2. The positive terminal is at node 0 and the negative terminal is at node 2.
3. **Voltage Controlled Voltage Source \( x_1V_0 \)**: This is connected between nodes 3 and 2. The positive terminal is at node 2 and the negative terminal is at node 3. The controlling voltage \( V_0 \) is across the inductor \( L_1 \), which is between nodes 0 and 2.

Based on these observations, the netlist lines can be written as follows:

- For the voltage source \( V_1 \): `V1 3 0 V1`
- For the inductor \( L_1 \): `L1 0 2 L1`
- For the voltage controlled voltage source \( x_1V_0 \): `E1 2 3 0 2 x1`

</thinking>
<answer>
V1 3 0 V1
L1 0 2 L1
E1 2 3 0 2 x1
</answer>