
<|begin_of_box|><thinking>I need to carefully analyze the circuit diagram to identify all components and their connections. 

First, I'll identify all nodes: 0, 1, 3, 4, 5 (node 0 appears to be the ground reference).

Next, I'll list each component with its connections:
1. Resistor R₁: Connected between nodes 4 and 3
2. Resistor R₂: Connected between nodes 4 and 5 (labeled V₀ indicating voltage across it)
3. Inductor L₁: Connected between nodes 3 and 0  
4. Capacitor C₁: Connected between nodes 1 and 0
5. Voltage source V₁: Connected between nodes 5 and 0 (with positive terminal at 5)
6. Dependent voltage source: Labeled x₁V₀, connected between nodes 3 and 1. This is a voltage-controlled voltage source (VCVS) where the controlling voltage is V₀ (across R₂, nodes 4 and 5) with gain x₁.

For the dependent source, in SPICE notation, a VCVS is represented as E followed by the source name, then the positive/negative nodes of the source, then the positive/negative control nodes, and finally the gain value.

Now I'll compile the netlist with proper formatting, ensuring each component line follows SPICE conventions.</thinking>
<answer>R1 4 3
R2 4 5
L1 3 0
C1 1 0
V1 5 0
E1 3 1 4 5 x1</answer>