<thinking>
To create a SPICE-like netlist for the given circuit, I'll identify each component and its connections:

1. **Voltage Source V1**: Connected between nodes 0 and 1.
2. **Voltage-Controlled Voltage Source (VCVS) x1V0**: The controlling voltage is across nodes 5 and 6, and it's connected between nodes 1 and 3.
3. **Voltage-Controlled Voltage Source (VCVS) x2V0**: The controlling voltage is across nodes 5 and 6, and it's connected between nodes 3 and 5.
4. **Resistor R1**: Connected between nodes 0 and 4.
5. **Resistor R2**: Connected between nodes 3 and 4.
6. **Resistor R3**: Connected between nodes 5 and 6.
7. **Capacitor C1**: Connected between nodes 4 and 6.

Now, let's write the netlist lines based on these observations:

- For V1: `V1 1 0`
- For x1V0: `Ex1V0 1 3 5 6 x1`
- For x2V0: `Ex2V0 3 5 5 6 x2`
- For R1: `R1 0 4`
- For R2: `R2 3 4`
- For R3: `R3 5 6`
- For C1: `C1 4 6`

</thinking>
<answer>
V1 1 0
Ex1V0 1 3 5 6 x1
Ex2V0 3 5 5 6 x2
R1 0 4
R2 3 4
R3 5 6
C1 4 6
</answer>