
<|begin_of_box|><thinking>I need to carefully analyze the circuit to identify all components and their connections. 

First, I'll identify each component and its node connections:
1. Voltage source V₁: Connected between nodes 0 (negative) and 5 (positive)
2. Resistor R₂: Connected between nodes 5 and 3
3. Capacitor C₁: Connected between nodes 0 and 1  
4. Resistor R₁: Connected between nodes 1 and 2 (with voltage V₀ across it)
5. Voltage-controlled voltage source (VCVS): The diamond-shaped component with + terminal on node 3 and - terminal on node 2. It's controlled by voltage V₀ (across R₁, nodes 1 and 2) with gain factor x₁.

For SPICE netlist formatting:
- Voltage sources use "V" prefix
- Resistors use "R" prefix  
- Capacitors use "C" prefix
- VCVS uses "E" prefix
- Nodes are listed in order: positive terminal first, then negative terminal
- For VCVS, the format is: E[name] [output+] [output-] [control+] [control-] [gain]

Transcribing each component:
- V₁: V1 0 5
- R₂: R2 5 3
- C₁: C1 0 1
- R₁: R1 1 2
- VCVS: E1 3 2 1 2 x1 (output between 3 and 2, control between 1 and 2, gain x₁)

I've verified all connections match the schematic and used standard SPICE notation.</thinking>
<answer>V1 0 5
R2 5 3
C1 0 1
R1 1 2
E1 3 2 1 2 x1</answer>