<thinking>
To create the SPICE-like netlist, I'll identify each component and its connections:

1. **Voltage Source V1**: It's connected between nodes 0 and 1. The positive terminal is at node 0.
2. **Resistor R1**: It's connected between nodes 1 and 2.
3. **Inductor L1**: It's connected between nodes 2 and 5. The voltage across it is labeled as V0.
4. **Resistor R2**: It's connected between nodes 3 and 0.
5. **Current Controlled Voltage Source (CCVS)**: It's connected between nodes 1 and 3. The controlling current is x1*V0, which is the current through L1.
6. **Voltage Controlled Voltage Source (VCVS)**: It's connected between nodes 0 and 5. The controlling voltage is x2*V0, which is the voltage across L1.

Now, I'll write the netlist lines based on these observations.

</thinking>
<answer>
V1 0 1
R1 1 2
L1 2 5 V0
R2 3 0
E1 1 3 V0 x1
F1 0 5 V0 x2
</answer>