<thinking>
To create the netlist, we need to identify all the components and their connections in the circuit:

1. **Resistors:**
   - \( R_1 \) is connected between nodes 4 and 0.
   - \( R_2 \) is connected between nodes 1 and 0.
   - \( R_3 \) is connected between nodes 1 and 4.

2. **Independent Voltage Source:**
   - \( V_0 \) is connected between nodes 1 and 0, with the positive terminal at node 1.

3. **Independent Voltage Source:**
   - \( V_1 \) is connected between nodes 0 and 3, with the positive terminal at node 3.

4. **Dependent Voltage Source:**
   - The dependent voltage source \( x_1 V_0 \) is connected between nodes 4 and 3, with the positive terminal at node 3. It is controlled by the voltage across \( V_0 \).

Now, we can write the netlist:

- Resistors are denoted as `R<name> <node1> <node2> <value>`.
- Independent voltage sources are denoted as `V<name> <node1> <node2> <value>`.
- Dependent voltage sources are denoted as `E<name> <node1> <node2> <control_node1> <control_node2> <gain>`.

Let's write the netlist based on these observations.
</thinking>
<answer>
R1 4 0 R1
R2 1 0 R2
R3 1 4 R3
V0 1 0 V0
V1 0 3 V1
E1 4 3 1 0 x1
</answer>