
<|begin_of_box|><thinking>I need to carefully analyze the circuit diagram to identify all components, their connections, and node labels. 

First, I'll identify the nodes: the diagram shows nodes labeled 1, 0, 3, and 4.

Next, I'll list each component and its connections:
1. Resistor R2: Connected between node 1 (positive) and node 0 (negative), with voltage source V0 across it
2. Resistor R3: Connected between node 1 and node 4
3. Resistor R1: Connected between node 4 and node 0  
4. Voltage source V1: Connected between node 0 (negative) and node 3 (positive)
5. Dependent voltage source (VCVS): Labeled c1V0, connected between node 4 (negative) and node 3 (positive), controlled by voltage V0 across nodes 1 and 0

For SPICE netlist formatting:
- Resistors use 'R' prefix followed by name and node connections
- Independent voltage sources use 'V' prefix followed by name, node connections, and DC specification
- Dependent voltage sources (VCVS) use 'E' prefix followed by name, output node connections, controlling node connections, and gain value

The dependent source has a gain of c1 and is controlled by the voltage across nodes 1 and 0.</thinking>
<answer>R2 1 0
V0 1 0 DC
R3 1 4
R1 4 0
V1 3 0 DC
E c1V0 3 4 1 0 c1</answer>