<thinking>
To create the netlist, we need to identify all the components and their connections:

1. **Voltage Source (V1):**
   - Connected between nodes 0 and 1.

2. **Dependent Voltage Sources:**
   - Voltage source dependent on V0 with gain x2, connected between nodes 0 and 7.
   - Voltage source dependent on V0 with gain x1, connected between nodes 1 and 4.

3. **Inductor (L1):**
   - Connected between nodes 7 and 4.

4. **Resistors:**
   - R1 connected between nodes 4 and 2.
   - R2 connected between nodes 5 and 3.
   - R3 connected between nodes 1 and 2.
   - R4 connected between nodes 2 and 3.
   - R5 connected between nodes 7 and 5.

5. **Capacitor (C1):**
   - Connected between nodes 4 and 5.

6. **Voltage across R5 (V0):**
   - V0 is the voltage across R5, between nodes 7 and 5.

Now, we can write the netlist:

- V1 is a voltage source between nodes 0 and 1.
- E1 is a voltage-controlled voltage source with gain x2, dependent on V0, between nodes 0 and 7.
- E2 is a voltage-controlled voltage source with gain x1, dependent on V0, between nodes 1 and 4.
- L1 is an inductor between nodes 7 and 4.
- R1 is a resistor between nodes 4 and 2.
- R2 is a resistor between nodes 5 and 3.
- R3 is a resistor between nodes 1 and 2.
- R4 is a resistor between nodes 2 and 3.
- R5 is a resistor between nodes 7 and 5.
- C1 is a capacitor between nodes 4 and 5.

The netlist is as follows:
</thinking>

<answer>
V1 0 1 DC
E1 0 7 VALUE={x2*V(7,5)}
E2 1 4 VALUE={x1*V(7,5)}
L1 7 4 L1
R1 4 2 R1
R2 5 3 R2
R3 1 2 R3
R4 2 3 R4
R5 7 5 R5
C1 4 5 C1
</answer>