
<|begin_of_box|><thinking>
To create the netlist, I need to identify all components and their connections in the circuit:

1. **Voltage Source (V1)**: Connected between node 0 (negative) and node 1 (positive). Format: V1 0 1

2. **Dependent Voltage Sources**:
   - **E1 (x₂V₀)**: Output between node 7 (positive) and node 0 (negative). Controlled by voltage V₀ across nodes 7 (positive) and 5 (negative). Gain is x₂. Format: E1 7 0 7 5 x2
   - **E2 (x₁V₀)**: Output between node 4 (positive) and node 1 (negative). Controlled by voltage V₀ across nodes 7 (positive) and 5 (negative). Gain is x₁. Format: E2 4 1 7 5 x1

3. **Resistors**:
   - R1: Between node 4 and 2 → R1 4 2
   - R2: Between node 5 and 3 → R2 5 3
   - R3: Between node 1 and 2 → R3 1 2
   - R4: Between node 2 and 3 → R4 2 3
   - R5: Between node 7 and 5 (with V₀ labeled) → R5 7 5

4. **Inductor (L1)**: Between node 7 and 4 → L1 7 4

5. **Capacitor (C1)**: Between node 4 and 5 → C1 4 5

I verified all node connections and component polarities to ensure accuracy. Each component follows SPICE syntax: [Component Type] [Name] [Node+] [Node-] [Parameters]
</thinking>
<answer>
V1 0 1
E1 7 0 7 5 x2
E2 4 1 7 5 x1
R1 4 2
R2 5 3
R3 1 2
R4 2 3
R5 7 5
L1 7 4
C1 4 5
</answer>