<thinking>
To create the SPICE-like netlist, I'll identify each component and its connections based on the provided circuit diagram. Here's the step-by-step reasoning:

1. **Identify Resistors:**
   - R1: Connected between nodes 3 and 5.
   - R2: Connected between nodes 5 and 8.
   - R3: Connected between nodes 1 and 6.
   - R4: Connected between nodes 8 and 11.
   - R5: Connected between nodes 1 and 2.
   - R6: Connected between nodes 2 and 3.
   - R7: Connected between nodes 9 and 0.
   - R8: Connected between nodes 0 and 11.

2. **Identify Capacitors:**
   - C1: Connected between nodes 4 and 7.
   - C2: Connected between nodes 6 and 7.

3. **Identify Voltage Source:**
   - V1: Connected between nodes 0 and 7.

4. **Identify Controlled Voltage Sources:**
   - The controlled voltage source \( x_1 V_0 \) is connected between nodes 1 and 6, controlled by the voltage across nodes 5 and 8.
   - Another controlled voltage source \( x_1 V_0 \) is connected between nodes 2 and 4, controlled by the voltage across nodes 5 and 8.

Now, I'll write the netlist lines based on these identifications.
</thinking>
<answer>
R1 3 5
R2 5 8
R3 1 6
R4 8 11
R5 1 2
R6 2 3
R7 9 0
R8 0 11
C1 4 7
C2 6 7
V1 0 7
E1 1 6 5 8 x1
E2 2 4 5 8 x1
</answer>