
<|begin_of_box|><thinking>I need to transcribe the circuit into a SPICE-like netlist by identifying all components and their connections. 

First, I'll identify each component:
1. Voltage source V₁: Connected between node 0 (negative terminal) and node 2 (positive terminal)
2. Capacitor C₂: Connected between node 0 and node 2
3. Voltage-controlled current source: The diamond symbol indicates a voltage-controlled current source. It's connected between node 2 and node 3, with the arrow showing current flowing from node 2 to node 3. The control is labeled "x₁V₀" where V₀ appears to be the voltage across capacitor C₃ (between nodes 3 and 4)
4. Capacitor C₁: Connected between node 2 and node 3
5. Resistor R₁: Connected between node 2 and node 4
6. Capacitor C₃: Connected between node 3 and node 4, labeled "V₀"

Next, I'll format each component according to SPICE conventions:
- Voltage sources: Vname node+ node-
- Capacitors: Cname node+ node-
- Resistors: Rname node+ node-
- Voltage-controlled current sources: Gname node+ node- gain control_voltage

The voltage-controlled current source (G1) will have nodes 2 and 3, with gain x₁ and control voltage V₀ (across nodes 3 and 4).</thinking>
<answer>V1 0 2
C2 0 2
G1 2 3 x1 V0
C1 2 3
R1 2 4
C3 3 4</answer>