<thinking>
The circuit consists of the following components:

1. A resistor \( R_1 \) between nodes 3 and 1.
2. A dependent voltage source \( x_1 V_0 \) between nodes 1 and 0. It is controlled by the voltage across the resistor \( R_1 \).
3. An independent voltage source \( V_1 \) between nodes 3 and 0.

The netlist will include:
- The resistor \( R_1 \) with nodes 3 and 1.
- The dependent voltage source \( x_1 V_0 \) with nodes 1 and 0, controlled by the voltage across nodes 3 and 1.
- The independent voltage source \( V_1 \) with nodes 3 and 0.

The netlist format is:
- Resistor: `R<name> <node1> <node2> <value>`
- Independent voltage source: `V<name> <node+> <node-> <value>`
- Dependent voltage source: `E<name> <node+> <node-> <control_node+> <control_node-> <gain>`

Let's write the netlist:

1. Resistor \( R_1 \) between nodes 3 and 1.
2. Dependent voltage source \( x_1 V_0 \) between nodes 1 and 0, controlled by the voltage across nodes 3 and 1.
3. Independent voltage source \( V_1 \) between nodes 3 and 0.
</thinking>

<answer>
R1 3 1 R1
E1 1 0 3 1 x1
V1 3 0 V1
</answer>