
<|begin_of_box|><thinking>
To transcribe the circuit into a SPICE-like netlist, I need to identify all components and their connections:
1. **Resistor R₁**: Connected between node 3 (negative terminal of V₀) and node 1 (positive terminal of V₀). In SPICE, resistors are denoted as `Rname nodeA nodeB value`, so this becomes `R1 3 1`.
2. **Voltage Source V₀**: Has its positive terminal at node 1 and negative terminal at node 3 (as indicated by the polarity symbols). Voltage sources are written as `Vname node+ node- type value`, so this is `V0 1 3`.
3. **Voltage Source V₁**: Positive terminal at node 3, negative terminal at node 0 (per the polarity marks). This translates to `V1 3 0`.
4. **Dependent Current Source**: The diamond with an arrow represents a voltage-controlled current source (VCCS). The current flows from node 1 to node 0 (arrow direction), and it is controlled by V₀ (voltage across R₁, i.e., V(1,3)). VCCS syntax is `Gname node+ node- control_node+ control_node- gain`, so this becomes `Gx1 1 0 1 3 x1` (gain is x₁, control voltage is V(1,3)).

All components are accounted for, and node connections are verified against the schematic.
</thinking>
<answer>
R1 3 1
V0 1 3
V1 3 0
Gx1 1 0 1 3 x1
</answer>