<thinking>
The circuit consists of the following components:

1. A resistor \( R_1 \) between nodes 3 and 1.
2. An independent voltage source \( V_1 \) between nodes 1 and 0.
3. A voltage-controlled voltage source (VCVS) with a gain of \( x_1 \) between nodes 0 and 3, controlled by the voltage across the resistor \( R_1 \) (between nodes 3 and 1).

The netlist will include:
- The resistor \( R_1 \) with its nodes and resistance value.
- The independent voltage source \( V_1 \) with its nodes and voltage value.
- The VCVS with its nodes, gain, and controlling nodes.

Assuming standard SPICE notation:
- Resistor: `R<name> <node1> <node2> <resistance>`
- Voltage source: `V<name> <node+> <node-> <voltage>`
- VCVS: `E<name> <node+> <node-> <control_node+> <control_node-> <gain>`

Let's write the netlist:

1. Resistor \( R_1 \) between nodes 3 and 1:
   - `R1 3 1 R1`

2. Voltage source \( V_1 \) between nodes 1 and 0:
   - `V1 1 0 V1`

3. VCVS with gain \( x_1 \), between nodes 0 and 3, controlled by voltage across nodes 3 and 1:
   - `E1 0 3 3 1 x1`
</thinking>

<answer>
R1 3 1 R1
V1 1 0 V1
E1 0 3 3 1 x1
</answer>