<thinking>
To create the netlist, we need to identify all components and their connections:

1. **Resistors:**
   - \( R_1 \) is connected between nodes 0 and 2.
   - \( R_2 \) is connected between nodes 4 and 2.
   - \( R_3 \) is connected between nodes 5 and 3.
   - \( R_4 \) is connected between nodes 6 and 5.
   - \( R_5 \) is connected between nodes 2 and 3.

2. **Voltage Sources:**
   - \( V_0 \) is connected between nodes 0 and 2 (positive at node 2).
   - \( V_1 \) is connected between nodes 3 and 0 (positive at node 3).

3. **Dependent Source:**
   - The dependent voltage source \( x1V_0 \) is connected between nodes 4 and 6, controlled by the voltage across \( V_0 \).

Now, we can write the netlist:

- Resistors are denoted as `R<name> <node1> <node2> <value>`.
- Independent voltage sources are denoted as `V<name> <node1> <node2> <value>`.
- Dependent voltage sources are denoted as `E<name> <node1> <node2> <control_node1> <control_node2> <gain>`.

Assuming all resistors have a value of 1 ohm and the gain of the dependent source is \( x1 \), the netlist is as follows:
</thinking>

<answer>
R1 0 2 1
R2 4 2 1
R3 5 3 1
R4 6 5 1
R5 2 3 1
V0 2 0 DC 1
V1 3 0 DC 1
Ex1 4 6 2 0 x1
</answer>