<thinking>
To create the netlist, we need to identify all the components and their connections between nodes:

1. **Resistors:**
   - \( R_1 \) is connected between nodes 1 and 3.
   - \( R_2 \) is connected between nodes 5 and 0.
   - \( R_3 \) is connected between nodes 1 and 0.
   - \( R_4 \) is connected between nodes 3 and 6.

2. **Inductors:**
   - \( L_1 \) is connected between nodes 6 and 4.
   - \( L_2 \) is connected between nodes 4 and 5.

3. **Independent Voltage Source:**
   - \( V_1 \) is connected between nodes 4 and 0, with positive at node 4.

4. **Dependent Voltage Sources:**
   - A voltage-dependent voltage source \( x_2 V_0 \) is connected between nodes 3 and 4, controlled by \( V_0 \).
   - A voltage-dependent voltage source \( x_1 V_0 \) is connected between nodes 6 and 5, controlled by \( V_0 \).

5. **Voltage \( V_0 \):**
   - \( V_0 \) is the voltage across \( L_1 \) (nodes 6 and 4).

Now, we can write the netlist using these components and connections.
</thinking>

<answer>
R1 1 3 R1
R2 5 0 R2
R3 1 0 R3
R4 3 6 R4
L1 6 4 L1
L2 4 5 L2
V1 4 0 DC V1
E1 3 4 6 4 x2
E2 6 5 6 4 x1
</answer>