<thinking>
To create the netlist, we need to identify all the components and their connections in the circuit:

1. **Voltage Source (V1):** 
   - Connected between nodes 1 and 0.
   - Positive terminal at node 1 and negative terminal at node 0.

2. **Resistor (R1):**
   - Connected between nodes 1 and 3.

3. **Resistor (R2):**
   - Connected between nodes 4 and 0.

4. **Capacitor (C1):**
   - Connected between nodes 3 and 4.

5. **Resistor (R3):**
   - Connected between nodes 3 and 5.

6. **Resistor (R4):**
   - Connected between nodes 6 and 4.

7. **Voltage Controlled Voltage Source (VCVS):**
   - Output connected between nodes 5 and 6.
   - Controlled by the voltage across nodes 5 and 3 (V0).
   - Gain is x1.

Now, we can write the netlist lines for each component:

- V1 is a DC voltage source.
- R1, R2, R3, and R4 are resistors.
- C1 is a capacitor.
- The VCVS is defined with the gain and controlling nodes.

</thinking>
<answer>
V1 1 0 DC
R1 1 3 R1
R2 4 0 R2
C1 3 4 C1
R3 3 5 R3
R4 6 4 R4
E1 5 6 5 3 x1
</answer>