<thinking>
To create a SPICE-like netlist for the given circuit, I'll identify each component and its connections:

1. **Voltage Source V1**: It's connected between nodes 0 (ground) and 1.
2. **Resistors**:
   - R1 is between nodes 1 and 3.
   - R2 is between nodes 0 and 4.
   - R3 is between nodes 3 and 5.
   - R4 is between nodes 4 and 6.
3. **Capacitor C1**: It's between nodes 3 and 4.
4. **Voltage-controlled voltage source x1V0**: It's controlled by the voltage across R3 (nodes 3 and 5) and produces a voltage between nodes 5 and 6.

Now, let's write the netlist lines based on this analysis:

- Voltage source V1: `V1 1 0 V1`
- Resistors: 
  - `R1 1 3 R1`
  - `R2 0 4 R2`
  - `R3 3 5 R3`
  - `R4 4 6 R4`
- Capacitor: `C1 3 4 C1`
- Voltage-controlled voltage source: `E1 5 6 3 5 x1`

</thinking>
<answer>
V1 1 0 V1
R1 1 3 R1
R2 0 4 R2
R3 3 5 R3
R4 4 6 R4
C1 3 4 C1
E1 5 6 3 5 x1
</answer>