<thinking>
Okay, let's see. I need to create a SPICE-like netlist for this circuit. First, I'll identify all the components and their connections based on the image.

Starting with the nodes. The image has nodes labeled 0, 1, 3, 4, 5. Node 0 is the ground, I think. Node 1 is connected to R1, R2, and C1. Node 3 is connected to the voltage source V1 and C1. Node 4 is connected to R1 and R3. Node 5 is connected to R3 and the dependent source.

The components: R1 is between node 1 and 4. R2 is between node 1 and 0. C1 is between node 1 and 3. R3 is between node 4 and 5. The dependent voltage source is between node 5 and 3, controlled by V0, which is the voltage across R1 (nodes 1 and 4). The independent voltage source V1 is between node 3 and 0.

Wait, the dependent source is labeled as x1*V0. So it's a voltage-controlled voltage source (VCVS) with a gain of x1, controlled by the voltage V0, which is the voltage across R1. In SPICE, the controlling voltage is specified by the nodes. So V0 is the voltage from node 1 to node 4. The dependent source is connected between node 5 and 3, so the syntax would be something like E1 5 3 1 4 x1.

Let me list each component:

- R1: connects node 1 to 4.
- R2: connects node 1 to 0.
- C1: connects node 1 to 3.
- R3: connects node 4 to 5.
- V1: connects node 3 to 0.
- E1 (dependent source): connects node 5 to 3, controlled by the voltage between 1 and 4, with a gain of x1.

So the netlist lines would be:

R1 1 4 <value>
R2 1 0 <value>
C1 1 3 <value>
R3 4 5 <value>
V1 3 0 <value>
E1 5 3 1 4 x1

But since the actual values (like resistance values, capacitance, voltage) aren't given, I'll just use the component names as placeholders. The dependent source uses E with the controlling nodes.

Double-checking connections. Node 5 is connected to R3 and the dependent source. The dependent source's positive terminal is at node 5, negative at 3. The controlling voltage is from 1 to 4. That matches the image. The capacitor is between 1 and 3. The voltage source V1 is between 3 and 0. R2 is between 1 and 0. R1 between 1 and 4. R3 between 4 and 5. All looks correct.
</thinking>
<answer>
R1 1 4 R1
R2 1 0 R2
C1 1 3 C1
R3 4 5 R3
V1 3 0 V1
E1 5 3 1 4 x1
</answer>