<thinking>First, I'll identify and label all the components and their connections based on the provided circuit diagram:

1. **Resistors:**
   - \( R_1 \) is connected between nodes 1 and 4.
   - \( R_2 \) is connected between nodes 1 and 0.
   - \( R_3 \) is connected between nodes 4 and 5.

2. **Capacitor:**
   - \( C_1 \) is connected between nodes 1 and 3.

3. **Voltage Source:**
   - \( V_1 \) is connected between nodes 3 and 0.

4. **Voltage Controlled Voltage Source (VCVS):**
   - The VCVS is controlled by the voltage \( V_0 \) across \( R_1 \) (nodes 1 and 4) and has a gain of \( x_1 \). The output of the VCVS is connected between nodes 5 and 3.

Now, I'll write the SPICE-like netlist based on these observations:

- Resistors are represented as `R<name> <node1> <node2> <value>`.
- Capacitors are represented as `C<name> <node1> <node2> <value>`.
- Voltage sources are represented as `V<name> <node1> <node2> <value>`.
- VCVS is represented as `E<name> <output_node1> <output_node2> <control_node1> <control_node2> <gain>`.

Since the values of the components are not provided, I'll use placeholders for the values.

</thinking>
<answer>R1 1 4 R1_value
R2 1 0 R2_value
R3 4 5 R3_value
C1 1 3 C1_value
V1 3 0 V1_value
E1 5 3 1 4 x1
</answer>