
<|begin_of_box|><thinking>I need to carefully analyze the circuit diagram to extract all components and their connections. 

First, I'll identify all components and their node connections:
1. Voltage source V0: Connected between nodes 1 (+) and 4 (-)
2. Resistor R1: Connected between nodes 1 and 4 (in series with V0)
3. Capacitor C1: Connected between nodes 1 and 3
4. Resistor R2: Connected between nodes 1 and 0 (ground)
5. Resistor R3: Connected between nodes 4 and 5
6. Dependent current source: Diamond-shaped symbol with arrow pointing upward, indicating current flow from node 5 to node 3. Labeled "x1V0" meaning it's a voltage-controlled current source (VCCS) with gain x1, controlled by voltage V0 (which is across nodes 1-4)
7. Voltage source V1: Connected between nodes 3 (+) and 0 (-)

Next, I'll format each component according to SPICE netlist conventions:
- Independent voltage sources (V0, V1): Use "V" prefix with nodes and value
- Resistors (R1, R2, R3): Use "R" prefix with nodes and resistance value
- Capacitor (C1): Use "C" prefix with nodes and capacitance value  
- Dependent current source (VCCS): Use "G" prefix with nodes, gain, and controlling voltage reference

The netlist must include all components with proper node assignments and formatting.</thinking>
<answer>V0 1 4
R1 1 4 R1
C1 1 3 C1
R2 1 0 R2
R3 4 5 R3
G1 5 3 x1 V(1,4)
V1 3 0 V1</answer>