if there are no lights on the display
check to make sure the power cord is
still plugged into the grounded
three-prong
Outlet if plugged in a simple way to
check the outlet is to use a known
working lamp or hair dryer to check to
see if the outlet is
operating if the outlet is on a GFCI
outlet or shared circuit check to see if
the outlet needs to be
reset next check to see if the fuse is
blown or circuit breaker thrown in the
household circuit
panel if the outlet is the problem call
an
electrician was an extension cord being
used if an extension cord was used there
will be less voltage supplied to the
washer this will cause the motor to run
hot and shut down
prematurely discontinue using the
extension
cord if power is supplied to the machine
check to make sure that the cold water
is turned on and
operational restart the washer with cold
water selected if no cold water comes in
check for kinked water line or clogged
hose Inlet
screens if this does not solve the
problem go to troubleshooting for won't
drain or
spin