Maximizing Output Voltage of Three-Phase Nine-Leg Multilevel STATCOM by Minimum Infinity Norm Optimization

Download PDF
Open Webpage

Lukás Adam, Tomás Komrska, Frantisek Iska, Zdenek Peroutka

Published: 2025, Last Modified: 15 Sept 2025IEEE Trans. Ind. Electron. 2025EveryoneRevisionsBibTeXCC BY-SA 4.0
Abstract: Power converters based on classic three-phase three-leg voltage source inverters (VSIs) that provide a multilevel output voltage are an interesting alternative to multilevel converters that suffer from complexity and higher costs. However, the multiple degrees of freedom of these systems pose a challenge to their optimal control. In this article, the minimum infinity norm algorithm is proposed and implemented for triple three-leg VSI static synchronous compensators (STATCOM) connected to a three-phase power grid. It is shown that the method provides optimal utilization of the dc-link voltage and allows to increase the output voltage by 39% compared to the minimum $\boldsymbol{l}_{\mathbf{2}}$ norm method and by 16% compared to the phase-disposition pulse width modulation (PD-PWM) while keeping total harmonic distortion (THD) below 0.5%. In addition, the algorithm has been optimized for real-time systems, resulting in a very fast algorithm with a worst-case complexity of 39 scalar–scalar multiplications and no division.