Design and Optimization of an Auxetic Piezoelectric Energy Harvester With Tapered Thickness for IoT Applications

Keyu Chen, Shitong Fang, Tao Yan, Xinyuan Chuai, Xin Li, Zhihui Lai, Junrui Liang, Wei-Hsin Liao

Abstract: Vibration energy harvesters have been widely investigated to supply sustainable power for devices in the Internet of Things (IoT). Despite the advances in vibration energy harvesters, there still remain challenges in the design and optimization of energy harvesters to meet the increasing power demand of long-range IoT applications. In this article, an auxetic piezoelectric energy harvester with tapered thickness (TAEH) is proposed to improve the efficiency of energy harvesting by achieving the uniform stress and high average stress. Compared with traditional auxetic piezoelectric energy harvester with uniform thickness (UAEH), the stress distribution with tapered thickness is more uniform, which can contribute to a higher power output with lower maximum stress. Furthermore, the multiobjective optimization is used to further improve the average stress values without increasing the maximum stress, thus increasing the energy output. Finite element analysis is performed to validate the performance of the energy harvesters. In the experimental validation, it is found that with the tapered thickness introduced to the auxetic energy harvester, the maximum power output and power density of TAEH can be increased by 212.84% and 279.08%, respectively, compared with UAEH. After the optimization, these two indices of the optimized TAEH (OTAEH) are further increased by 24.32% and 27.59%, respectively. Specifically, a high power density of 0.148 mW/g is achieved in the OTAEH, indicating its high vibration energy harvesting performance with lightweight. Finally, it is demonstrated that the OTAEH can generate more than 40.94 mJ within 27.6 s to successfully power an IoT device for temperature sensing and long-range data transmission.